Wheel Hub VKBA3953
The DUHUI Bearing VKBA3953 wheel hub is a rear axle hub assembly engineered for Honda Accord VI (CG) models from 1998 through 2002 without ABS. This rear wheel hub bearing matches OE reference 42200-S84-A01 and cross-references to SKF VKBA 3953, FAG 713618810, and SNR R174.58. It features a 151.90 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on Accord models with rear drum brakes.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0218 |
| Part Number | VKBA3953 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 151.90 mm (5.980 inch) |
| Flange Diameter | 151.90 mm (5.980 inch) |
| Bolt Hole Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Rim Hole Number | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 3.40 kg (7.50 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0218
OE Numbers: 42200-S84-A01, 42200S84A01, 42200-S84-A02
Reference Numbers (Interchange):
SKF: VKBA 3953
FAG: 713618810
SNR: R174.58
NTN: HUB209-1
NSK: 46BWD01
KOYO: 3DACF026F-2AS
MOOG: 512327
TIMKEN: HA590190
BCA: 512327
OPTIMAL: 912517
BLUE PRINT: ADH28328
NIPPARTS: J4714033
A.B.S.: 201313
GSP: 9230024
Vehicle Fitment
HONDA: Accord VI (CG, CK, CH) Saloon (1998-2002) 2.0 i (CG8, CG9), 2.3 i (CG3, CG5), 2.3 i Type-R (CH1) with Rear Drum Brakes and Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Honda Accord VI models without ABS and with rear drum brakes, covering the 1998 through 2002 model range.
- Matches Honda OE numbers 42200-S84-A01, 42200S84A01, and 42200-S84-A02 for direct replacement.
- 151.90 mm flange diameter with 4-hole rim pattern and 114.30 mm bolt circle matches the original mounting configuration on the Accord VI rear hub.
- 28.00 mm inner diameter provides the correct bearing envelope for this application.
- Cross-references to SKF VKBA 3953, FAG 713618810, SNR R174.58, and TIMKEN HA590190 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Honda Accord VI (CG, CK, CH) (1998-2002) models without ABS and with rear drum brakes. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 151.90 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
