Wheel Hub VKBA3731
The DUHUI Bearing VKBA3731 wheel hub is a rear axle hub assembly engineered for Toyota Corolla E9, E10, and E11 models from 1987 through 2002. This rear wheel hub bearing matches OE references including 42409-12020, 42409-19015, and 42410-02040. It features a 140.00 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these Toyota Corolla rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0193 |
| Part Number | VKBA3731 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 140.00 mm (5.512 inch) |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Bolt Hole Circle Diameter | 99.30 mm (3.909 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 3.00 kg (6.61 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0193
OE Numbers: 42409-12020, 42409-19015, 42410-02040, 42409-12030, 42450-02050, 90301-61002
Reference Numbers (Interchange):
SKF: VKBA 3731
FAG: 713618570
SNR: R169.39
MOOG: 512018
Blue Print: ADT38346
HERTH+BUSS JAKOPARTS: J4712043
FEBI BILSTEIN: 177538
MAXGEAR: 33-0374
FEBEST: 0182-AE100R
NTY: KLT-TY-031
Vehicle Fitment
TOYOTA: Corolla (_E9_) Saloon (1987-1994) 1.3, 1.6, 1.8 D; Corolla (_E9_) Hatchback (1987-1995) 1.3, 1.6, 1.8 D; Corolla (_E10_) Saloon (1991-1999) 1.3 12V (EE100_), 1.3 XLI 16V (EE101_), 1.6 (AE101_), 1.6 Si (AE101_), 2.0 D (CE100_); Corolla (_E10_) Hatchback (1992-1999) 1.3, 1.6, 2.0 D; Corolla (_E11_) Saloon (1997-2002) 1.4 (EE111_), 1.4 16V (ZZE111_), 1.6, 1.9 D; Corolla (_E11_) Hatchback (1997-2002) 1.4, 1.6, 1.9 D; Corolla (_E11_) Estate (1997-2002) 1.4, 1.6, 1.9 D
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Toyota Corolla E9, E10, and E11 models without ABS, covering the 1987 through 2002 model range.
- Matches Toyota OE numbers 42409-12020, 42409-19015, 42410-02040, and 42409-12030 for direct replacement.
- 140.00 mm flange diameter with 4-hole rim pattern and 99.30 mm bolt circle matches the original mounting configuration on these Corolla rear hubs.
- 28.00 mm inner diameter provides the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 3731, FAG 713618570, FEBI BILSTEIN 177538, and MAXGEAR 33-0374 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Toyota Corolla E9, E10, and E11 (1987-2002) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 140.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
