Wheel Hub VKBA3728
The DUHUI Bearing VKBA3728 wheel hub is a rear axle hub assembly engineered for Toyota RAV4 I (SXA1_) and Ipsum / Opa (XM10) models from 1994 through 2001. This rear wheel hub bearing matches OE references including 42409-42010 and 42410-42010, with cross-references to SKF VKBA 3728, FAG 713618420, and SNR R169.42. It features a 139.90 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these Toyota SUV and MPV rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0192 |
| Part Number | VKBA3728 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 139.90 mm (5.508 inch) |
| Flange Diameter | 139.90 mm (5.508 inch) |
| Bolt Hole Circle Diameter | 106.00 mm (4.173 inch) |
| Wheel Pilot Diameter | 38.00 mm (1.496 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.80 kg (6.17 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0192
OE Numbers: 42409-42010, 42410-42010, 42409-42011, 42410-42011
Reference Numbers (Interchange):
SKF: VKBA 3728
FAG: 713618420
SNR: R169.42
HERTH+BUSS JAKOPARTS: J4712052
QUINTON HAZELL: QWB1139
MOOG: TO-WB-12120
OPTIMAL: 982762
BLUE PRINT: ADT38347
NIPPARTS: J4712052
A.B.S.: 201282
SPIDAN: 27149
GSP: 9230018
Vehicle Fitment
TOYOTA: RAV4 I (SXA1_) (1994-2000) 1.8 (SXA11_), 2.0 (SXA10_, SXA11_) 4WD; Ipsum / Opa (XM10) MPV (1996-2001) 1.8, 2.0 (Non-ABS Models)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Toyota RAV4 I (SXA1_) and Ipsum / Opa (XM10) models without ABS, covering the 1994 through 2001 model range.
- Matches Toyota OE numbers 42409-42010, 42410-42010, 42409-42011, and 42410-42011 for direct replacement.
- 139.90 mm flange diameter with 4-hole rim pattern and 106.00 mm bolt circle matches the original mounting configuration on these rear hubs.
- 28.00 mm inner diameter provides the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 3728, FAG 713618420, SNR R169.42, and QUINTON HAZELL QWB1139 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Toyota RAV4 I (SXA1_) (1994-2000) and Ipsum / Opa (XM10) (1996-2001) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 139.90 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
