Wheel Hub VKBA3458
The DUHUI Bearing VKBA3458 wheel hub is a rear axle hub assembly engineered for Volvo S40 I (VS) and V40 models from 1995 through 2004. This rear wheel hub bearing matches OE references including 30812651 and 30889072, with cross-references to SKF VKBA 3458, FAG 713660120, and SNR R165.22. It features a 139.70 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these Volvo rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0084 |
| Part Number | VKBA3458 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 139.70 mm (5.500 inch) |
| Flange Diameter | 139.70 mm (5.500 inch) |
| Bolt Hole Circle Diameter | 78.70 mm (3.098 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.75 kg (6.06 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0084
OE Numbers: 30812651, 30889072, 30639876, 30748191
Reference Numbers (Interchange):
SKF: VKBA 3458
FAG: 713660120
SNR: R165.22
RUVILLE: 6522
SPIDAN: 27133
QUINTON HAZELL: QWB1233
Borg & Beck: BK1232
MOOG: VO-WB-11777
OPTIMAL: 892843
BLUE PRINT: ADJ138207
FEBI BILSTEIN: 26570
A.B.S.: 201191
Vehicle Fitment
VOLVO: S40 I (VS) Saloon (1995-2004), V40 I (VS) Estate (1996-2004), Non-ABS Models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Volvo S40 I (VS) and V40 models without ABS, covering the 1995 through 2004 model range.
- Matches Volvo OE numbers 30812651, 30889072, 30639876, and 30748191 for direct replacement.
- 139.70 mm flange diameter with 4-hole rim pattern and 78.70 mm bolt circle matches the original mounting configuration on these rear hubs.
- 28.00 mm inner diameter provides the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 3458, FAG 713660120, SNR R165.22, and QUINTON HAZELL QWB1233 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Volvo S40 I (VS) (1995-2004) and V40 I (VS) (1996-2004) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 139.70 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
