Wheel Hub VKBA3304
The DUHUI Bearing VKBA3304 wheel hub is a rear axle hub assembly engineered for Honda Prelude IV (BB) models from 1991 through 1997 without ABS. This rear wheel hub bearing matches OE reference 42200-SM4-A01 and cross-references to SKF VKBA 3304, FAG 713617290, and SNR R174.32. It features a 139.70 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on the Prelude IV rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0060 |
| Part Number | VKBA3304 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 139.70 mm (5.500 inch) |
| Flange Diameter | 139.70 mm (5.500 inch) |
| Bolt Hole Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Flange Offset | 40.60 mm (1.598 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.70 kg (5.95 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0060
OE Numbers: 42200-SM4-A01, 42200SM4A01, 42200-SM4-A02, 42200-SM4-008
Reference Numbers (Interchange):
SKF: VKBA 3304
FAG: 713617290
SNR: R174.32
SPIDAN: 27009
RUVILLE: 7432
QUINTON HAZELL: QWB912403
OPTIMAL: 912403
BLUE PRINT: ADH28313
MOOG: HO-WB-11750
TIMKEN: 512017
BCA: 512017
Borg & Beck: BK1149
A.B.S.: 201277
Vehicle Fitment
HONDA: Prelude IV (BB) Coupe (1991-1997), Non-ABS Models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Honda Prelude IV (BB) models without ABS, covering the 1991 through 1997 model range.
- Matches Honda OE numbers 42200-SM4-A01, 42200SM4A01, 42200-SM4-A02, and 42200-SM4-008 for direct replacement.
- 139.70 mm flange diameter with 4-hole rim pattern and 114.30 mm bolt circle matches the original mounting configuration on the Prelude IV rear hub.
- 28.00 mm inner diameter provides the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 3304, FAG 713617290, SNR R174.32, and TIMKEN 512017 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Honda Prelude IV (BB) (1991-1997) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 139.70 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
