Wheel Hub VKBA3303
The DUHUI Bearing VKBA3303 wheel hub is a rear axle hub assembly engineered for Honda Prelude IV (BB) models from 1991 through 1997 with 4-Wheel ABS. This rear wheel hub bearing matches OE reference 42200-SS0-981 and cross-references to SKF VKBA 3303, FAG 713617280, and SNR R174.39. It features an integrated ABS tone ring sensor, a 139.00 mm flange diameter, and a 4-hole rim pattern, designed for direct replacement on the Prelude IV rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0059 |
| Part Number | VKBA3303 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 139.00 mm (5.472 inch) |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Bolt Hole Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Flange Offset | 59.70 mm (2.350 inch) |
| Hub Pilot Diameter | 70.20 mm (2.764 inch) |
| Rim Hole Number | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring Sensor |
| Weight | 2.90 kg (6.39 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0059
OE Numbers: 42200-SS0-981, 42200SS0981, 42200-SS0-982, 42200-SS0-008
Reference Numbers (Interchange):
SKF: VKBA 3303
FAG: 713617280
SNR: R174.39
RUVILLE: 7439
SPIDAN: 27153
HERTH+BUSS JAKOPARTS: J4714031
OPTIMAL: 912401
BLUE PRINT: ADH28314
MOOG: HO-WB-11751
TIMKEN: 512018
BCA: 512018
A.B.S.: 201278
GSP: 9230057
Vehicle Fitment
HONDA: Prelude IV (BB) Coupe (1991-1997), 4-Wheel ABS Models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit with integrated ABS tone ring sensor for Honda Prelude IV (BB) models equipped with 4-Wheel ABS.
- Matches Honda OE numbers 42200-SS0-981, 42200SS0981, 42200-SS0-982, and 42200-SS0-008 for direct replacement.
- 139.00 mm flange diameter with 4-hole rim pattern and 114.30 mm bolt circle matches the original mounting configuration on the Prelude IV rear hub.
- 28.00 mm inner diameter and 59.70 mm flange offset provide the correct bearing envelope for this application.
- Cross-references to SKF VKBA 3303, FAG 713617280, SNR R174.39, and TIMKEN 512018 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Honda Prelude IV (BB) (1991-1997) models equipped with 4-Wheel ABS. Confirm your vehicle has 4-Wheel ABS before ordering.
- Confirm the 4-hole rim pattern and 139.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Inspect the ABS sensor ring and connector for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
