Wheel Hub 4245020020
The DUHUI Bearing 4245020020 wheel hub is a rear axle hub assembly designed for Toyota Carina E hatchback, sedan, and station wagon models from 1992 through 1997. This rear wheel hub bearing matches OE reference 42450-20020 and cross-references to SKF VKBA 3234, FAG 713618170, and SNR R169.20. It features an angular ball bearing design, a 30.00 mm inner diameter, 66.00 mm outer diameter, and 40.00 mm width for direct replacement on the Carina E rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0081 |
| Part Number | 4245020020 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Bearing Assembly |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 66.00 mm (2.598 inch) |
| Width | 40.00 mm (1.575 inch) |
| Weight | 1.14 kg (2.513 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0081
OE Numbers: 42450-20020, 42409-05010, 42409-20010, 42410-20050, 42410-20150
Reference Numbers (Interchange):
SKF: VKBA 3234
FAG: 713618170
SNR: R169.20
JAPANPARTS: 692027632
OPTIMAL: 982379
BLUE PRINT: ADT38329
FEBEST: 0182-ST190R
NTY: KLT-TY-039
ASHIKA: 44-22039
JAPKO: 422039
Vehicle Fitment
TOYOTA: Carina E Hatchback (_T19_) (1992-1997), Carina E Sedan (_T19_) (1992-1997), Carina E Station Wagon (_T19_) (1992-1997)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub assembly with integrated angular ball bearing for Toyota Carina E models.
- Matches OE number 42450-20020 and cross-references to SKF VKBA 3234, FAG 713618170, and SNR R169.20 for simplified sourcing and verification.
- 30.00 mm inner diameter, 66.00 mm outer diameter, and 40.00 mm width provide the correct bearing envelope for the Carina E rear axle.
- Angular ball bearing design handles combined radial and axial loads from the rear axle.
- Complete hub unit with bearing integrated into the hub flange for direct bolt-on replacement.
Installation Notes
- This hub is for rear axle applications on Toyota Carina E (_T19_) models from 1992 through 1997. Confirm your vehicle model and year before ordering.
- Verify the 30.00 mm inner diameter and 66.00 mm outer diameter match your original bearing before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new hub unit.
- This bearing assembly requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for ABS sensor ring if your vehicle is equipped with ABS. This hub may not include an ABS ring depending on the variant.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
