Wheel Hub VKBA3451
The VKBA3451 wheel hub assembly from DUHUI Bearing provides a direct-fit replacement for the front axle of select BMW 7-Series E38 vehicles manufactured between 1995 and 2001, including 725tds, 728i, 728iL, and 730d models. This complete hub assembly is pre-assembled for simplified installation. This kit matches OE specifications including 31221092519 and 31211137996, and interchanges with industry-standard references such as SKF VKBA3451, FAG 713610930, and SNR R150.27.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH0080 |
| Part Number | VKBA3451 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Front Axle |
| Kit Contents | Hub × 1 |
| Inner Diameter | 37.00 mm (1.457 inch) |
| Outer Diameter | 139.00 mm (5.472 inch) |
| Width | 64.00 mm (2.520 inch) |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH0080
OE Numbers:
31221092519, 31211137996
Reference Numbers (Interchange):
SKF: VKBA3451
FAG: 713610930
SNR: R150.27
Vehicle Fitment
BMW 725 TDS (E38): 1996–2001
BMW 728 I / 728 IL (E38): 1995–2001
BMW 730 D (E38): 1998–2000
All applications: Front Axle. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for BMW E38 7-Series applications. Matches OE specifications 31221092519 and 31211137996.
- Precision-engineered to BMW tolerances for proper fitment and performance.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Fully assembled kit – no additional components required for installation.
Installation Notes
- Before installation, compare the inner diameter (37.00 mm), outer diameter (139.00 mm), and width (64.00 mm) against your original hub.
- Confirm your vehicle is the E38 7-Series with the specified engine before ordering.
- Torque the axle nut and mounting bolts to BMW specification.
- This hub fits both front driver and passenger sides. Sold individually.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies, center support bearings, and related components to OE specifications. Contact us
