Wheel Hub VKBA3560
The DUHUI Bearing VKBA3560 wheel hub is a rear axle hub assembly designed for Peugeot 607 (9D, 9U) sedan models from 2000 through 2011. This rear wheel hub bearing matches OE reference 374869 and 9630743280, with cross-references to SKF VKBA 3560, FAG 713650550, and SNR R159.41. It features a 32.00 mm inner diameter, 128.00 mm outer diameter, and 59.00 mm width for direct replacement on the 607 rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0130 |
| Part Number | VKBA3560 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Bearing Kit |
| Inner Diameter | 32.00 mm (1.260 inch) |
| Outer Diameter | 128.00 mm (5.039 inch) |
| Width | 59.00 mm (2.323 inch) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0130
OE Numbers: 374869, 9630743280
Reference Numbers (Interchange):
SKF: VKBA 3560
FAG: 713650550
SNR: R159.41
RUVILLE: 5941
SPIDAN: 27257
OPTIMAL: 602927
QUINTON HAZELL: QWB1335
Vehicle Fitment
PEUGEOT: 607 Sedan (9D, 9U) (2000-2011)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing kit for Peugeot 607 (9D, 9U) sedan models from 2000 through 2011.
- Matches OE numbers 374869 and 9630743280 and cross-references to SKF VKBA 3560, FAG 713650550, SNR R159.41, and RUVILLE 5941 for simplified sourcing and verification.
- 32.00 mm inner diameter, 128.00 mm outer diameter, and 59.00 mm width provide the correct bearing envelope for the 607 rear axle.
- Direct replacement for the original rear hub bearing unit without modification.
Installation Notes
- This hub is for rear axle applications on Peugeot 607 (9D, 9U) sedan models from 2000 through 2011. Confirm your vehicle model and year before ordering.
- Verify the 32.00 mm inner diameter and 128.00 mm outer diameter match your original bearing before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
