Wheel Hub VKBA3550
The DUHUI Bearing VKBA3550 wheel hub is a front axle hub assembly engineered for Volkswagen Lupo (6X1, 6E1) and Audi A2 (8Z0) models from 1998 through 2005 equipped with ABS. This front wheel hub bearing matches OE references 6E0407621D and 6E0407621C and cross-references to SKF VKBA 3550, FAG 713610530, and SNR R154.52. It features an integrated ABS sensor, a 117.60 mm flange diameter, a 4-hole rim pattern, and 62.00 mm outer diameter for direct replacement on the front axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0125 |
| Part Number | VKBA3550 |
| Position | Front Axle (Left, Right) |
| Product Type | Wheel Hub Bearing Kit |
| Inner Diameter | 34.00 mm (1.339 inch) |
| Outer Diameter | 62.00 mm (2.441 inch) |
| Width | 37.00 mm (1.457 inch) |
| Flange Diameter | 117.60 mm (4.630 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Has ABS with Integrated Sensor |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0125
OE Numbers: 6E0407621D, 6E0407621C
Reference Numbers (Interchange):
FAG: 713610530
SNR: R154.52
RUVILLE: 5452
SPIDAN: 27180
OPTIMAL: 101029
QUINTON HAZELL: QWB1364
TIMKEN: K78555
MAPCO: 26815
VAICO: V10-2123
MEYLE: 100 650 0002
TOPRAN: 112 345
NK: 763916
TRISCAN: 853029112
Vehicle Fitment
VOLKSWAGEN: Lupo Hatchback (6X1, 6E1) (1998-2005)
AUDI: A2 Hatchback (8Z0) (2000-2005)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing kit with integrated ABS sensor for Volkswagen Lupo (6X1, 6E1) and Audi A2 (8Z0) models equipped with ABS.
- Matches OE numbers 6E0407621D and 6E0407621C and cross-references to SKF VKBA 3550, FAG 713610530, SNR R154.52, and TIMKEN K78555 for simplified sourcing and verification.
- 117.60 mm flange diameter with 4-hole rim pattern matches the original mounting configuration on the Lupo and A2 front hub.
- 62.00 mm outer diameter provides the correct bearing envelope for this front axle application.
- Kit includes wheel bearing unit, hub flange, and integrated ABS sensor for direct replacement.
Installation Notes
- This hub is for front axle applications on Volkswagen Lupo and Audi A2 models from 1998 through 2005 equipped with ABS. Confirm your vehicle has ABS before ordering.
- Confirm the 4-hole rim pattern and 117.60 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Inspect the integrated ABS sensor connector and wiring for damage before installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
