Wheel Hub VKBA3225
The DUHUI Bearing VKBA3225 wheel hub is a rear axle hub assembly engineered for Nissan Micra I (K10), Micra II (K11), and March models from 1982 through 2007 without ABS. This rear wheel hub bearing matches OE references 432004F100, 432004F105, 4320221B00, 4320234B00, and 4320272B00 and cross-references to SKF VKBA 3225, FAG 713613640, and SNR R168.24. It features a 134.00 mm flange diameter, a 4-hole rim pattern, and includes the hub assembly with two split pins for direct replacement on the Micra and March rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0034 |
| Part Number | VKBA3225 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Flange Diameter | 134.00 mm (5.276 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | No |
| Kit Contents | Hub x 1, Split Pin x 2 |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0034
OE Numbers: 432004F100, 432004F105, 432004F106, 432004F116, 4320221B00, 4320234B00, 4320272B00
Reference Numbers (Interchange):
FAG: 713613640
SNR: R168.24
RUVILLE: 6824
SPIDAN: 26874
OPTIMAL: 962548
DELPHI: BK1034
QUINTON HAZELL: QWB868
HERTH+BUSS JAKOPARTS: J4711053
MOOG: NI-WB-11998
JAPANPARTS: KK21031
NK: 762210
FIRST LINE: FBK803
Automotive Bearings: BRT1277
Vehicle Fitment
NISSAN: Micra I (K10) (1982-1992), Micra II (K11) (1992-2007), March (K10) (1982-1992), March (K11) (1992-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit for Nissan Micra I (K10), Micra II (K11), and March models without ABS.
- Matches OE numbers 432004F100, 432004F105, 4320221B00, 4320234B00, and 4320272B00 and cross-references to SKF VKBA 3225, FAG 713613640, SNR R168.24, and MOOG NI-WB-11998 for simplified sourcing and verification.
- 134.00 mm flange diameter with 4-hole rim pattern matches the original mounting configuration on the Micra and March rear hub.
- Complete kit includes hub assembly and two split pins for a secure installation.
- No ABS sensor. This hub is for vehicles without ABS.
- Pre-set, pre-lubricated, and sealed design for maintenance-free operation.
Installation Notes
- This hub is for rear axle applications on Nissan Micra I (K10), Micra II (K11), and March models from 1982 through 2007 without ABS. Confirm your vehicle has no ABS before ordering.
- Confirm the 4-hole rim pattern and 134.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- Torque the axle nut to the vehicle manufacturer specification and secure with both split pins as included.
- Do not use an impact wrench to tighten axle nuts. Over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
