Wheel Hub VKBA3222
The DUHUI Bearing VKBA3222 wheel hub is a rear axle hub assembly engineered for Nissan Primera (P10) Sedan and Hatchback models from 1990 through 1996 without ABS. This rear wheel hub bearing matches OE references 4320050J00 and 4320050J06 and cross-references to SKF VKBA 3222, FAG 713613720, and SNR R168.27. It features a 148.00 mm outer diameter, a 4-hole rim pattern, dimensions of 27.00 mm inner diameter and 73.00 mm height, and no ABS sensor for direct replacement on the Primera P10 rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0032 |
| Part Number | VKBA3222 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Bearing Kit |
| Inner Diameter | 27.00 mm (1.063 inch) |
| Outer Diameter | 148.00 mm (5.827 inch) |
| Height | 73.00 mm (2.874 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | No |
| Weight | 2.22 kg (4.894 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0032
OE Numbers: 4320050J00, 4320050J06
Reference Numbers (Interchange):
FAG: 713613720
SNR: R168.27
RUVILLE: 6827
SPIDAN: 27270
OPTIMAL: 962703
DELPHI: BK1036
QUINTON HAZELL: QWB933
MOOG: NI-WB-11996
TIMKEN: 512028
BCA: 512028
GMB: GH20415
GSP: 9230018
A.B.S.: 200028
FIRST LINE: FBK801
Automotive Bearings: BRT1309
Vehicle Fitment
NISSAN: Primera Sedan (P10) (1990-1996), Primera Hatchback (P10) (1990-1996)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing kit for Nissan Primera (P10) Sedan and Hatchback models without ABS.
- Matches OE numbers 4320050J00 and 4320050J06 and cross-references to SKF VKBA 3222, FAG 713613720, SNR R168.27, and TIMKEN 512028 for simplified sourcing and verification.
- 148.00 mm outer diameter with 4-hole rim pattern matches the original mounting configuration on the Primera P10 rear hub.
- 27.00 mm inner diameter and 73.00 mm height provide the correct bearing envelope for this rear axle application.
- No ABS sensor. This hub is for vehicles without ABS.
- Pre-set, pre-lubricated, and sealed design for maintenance-free operation.
- Kit includes wheel bearing unit, axle nut, and dust cap for complete replacement.
Installation Notes
- This hub is for rear axle applications on Nissan Primera (P10) Sedan and Hatchback models from 1990 through 1996 without ABS. Confirm your vehicle has no ABS before ordering.
- Confirm the 4-hole rim pattern and 148.00 mm outer diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Torque the axle nut to the vehicle manufacturer specification after installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
