Wheel Hub VKBA3204
The DUHUI Bearing VKBA3204 wheel hub is a rear axle hub assembly engineered for Nissan Sunny III (N14), 100NX (B13) Coupe, and Sunny Wagon (Y10) models from 1990 through 2000 equipped with ABS. This rear wheel hub bearing matches OE references 4320050Y02, 4320050Y12, and 4320050Y07 and cross-references to SKF VKBA 3204, FAG 713613370, and SNR R168.34. It features an integrated ABS sensor ring, a 134.00 mm flange diameter, a 4-hole rim pattern with M12 x 1.5 studs, and dimensions of 30.00 mm inner diameter and 52.50 mm width for direct replacement on the rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0030 |
| Part Number | VKBA3204 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Bearing Kit |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 134.00 mm (5.276 inch) |
| Width | 52.50 mm (2.067 inch) |
| Flange Diameter | 134.00 mm (5.276 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 52.07 mm (2.050 inch) |
| Brake Pilot Diameter | 52.07 mm (2.050 inch) |
| Flange Offset | 52.50 mm (2.067 inch) |
| Hub Pilot Diameter | 62.23 mm (2.450 inch) |
| Bolt Size | M12 x 1.5 |
| Bolt Quantity | 4 |
| Rim Hole Number | 4 |
| ABS Sensor | Has ABS with Tone Ring Sensor |
| Weight | 2.20 kg (4.850 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0030
OE Numbers: 4320050Y02, 4320050Y12, 4320050Y07
Reference Numbers (Interchange):
FAG: 713613370
SNR: R168.34
RUVILLE: 6834
SPIDAN: 27272, 27273
OPTIMAL: 962714
DELPHI: BK745
QUINTON HAZELL: QWB1180
HERTH+BUSS JAKOPARTS: J4711029
MOOG: NI-WB-11994
TIMKEN: 512024
BCA: 512024
GMB: GH20412
GSP: 9230013
A.B.S.: 200024
FIRST LINE: FBK798
Vehicle Fitment
NISSAN: 100NX Coupe (B13) (1990-1996), Sunny III Sedan (N14) (1990-1996), Sunny III Hatchback (N14) (1990-1995), Sunny Wagon (Y10) (1990-2000), Sunny Boxcar (Y10) (1990-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing kit with integrated ABS sensor ring for Nissan Sunny III (N14), 100NX (B13), and Sunny Wagon (Y10) models equipped with ABS.
- Matches OE numbers 4320050Y02, 4320050Y12, and 4320050Y07 and cross-references to SKF VKBA 3204, FAG 713613370, SNR R168.34, and TIMKEN 512024 for simplified sourcing and verification.
- 134.00 mm flange diameter with 4-hole rim pattern and 100.00 mm bolt circle matches the original mounting configuration on the Sunny and 100NX rear hub.
- 30.00 mm inner diameter, 52.50 mm flange offset, and 62.23 mm hub pilot diameter provide the correct bearing envelope for this rear axle application.
- M12 x 1.5 wheel studs match the original thread specification for proper torque and wheel seating.
- Kit includes wheel bearing unit, ABS sensor ring, axle nut, and dust cap for complete replacement.
Installation Notes
- This hub is for rear axle applications on Nissan Sunny III (N14), 100NX (B13), and Sunny Wagon (Y10) models from 1990 through 2000 equipped with ABS. Confirm your vehicle has ABS before ordering.
- Confirm the 4-hole rim pattern and 134.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Torque the axle nut to the vehicle manufacturer specification after installation.
- Inspect the integrated ABS sensor ring for damage before installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
