Wheel Hub VKBA1484
The DUHUI Bearing VKBA1484 wheel hub is a rear axle hub assembly engineered for Ford Mondeo I and Mondeo II Station Wagon (BNP) models from 1993 through 2000 without ABS. This rear wheel hub bearing matches OE reference 5027624 and cross-references to SKF VKBA 1484, FAG 713678360, and SNR R152.45. It features a 136.00 mm outer diameter, dimensions of 130.00 mm width, and no ABS sensor for direct replacement on the Mondeo rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0023 |
| Part Number | VKBA1484 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Outer Diameter | 136.00 mm (5.354 inch) |
| Width | 130.00 mm (5.118 inch) |
| ABS Sensor | No |
| Weight | 2.60 kg (5.732 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0023
OE Numbers: 5027624, 6740358, 7205779
Reference Numbers (Interchange):
FAG: 713678360
SNR: R152.45
RUVILLE: 5245
SPIDAN: 26912
OPTIMAL: 302192
DELPHI: BK687
QUINTON HAZELL: QWB861
MOOG: FD-WB-11354
TIMKEN: 512019
BCA: 512019
GMB: GH20404
GSP: 9230007
A.B.S.: 200012
FIRST LINE: FBK801
Automotive Bearings: BRT1228, BRT1228
Vehicle Fitment
FORD: Mondeo I Station Wagon (BNP) (1993-1996), Mondeo II Station Wagon (BNP) (1996-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit for Ford Mondeo I and Mondeo II Station Wagon (BNP) models without ABS.
- Matches OE numbers 5027624, 6740358, and 7205779 and cross-references to SKF VKBA 1484, FAG 713678360, SNR R152.45, and TIMKEN 512019 for simplified sourcing and verification.
- 136.00 mm outer diameter matches the original mounting configuration on the Mondeo rear hub.
- 130.00 mm width provides the correct bearing envelope for this rear axle application.
- No ABS sensor. This hub is for vehicles without ABS.
- Pre-set, pre-lubricated, and sealed design for maintenance-free operation.
- Kit includes wheel bearing unit, axle nut, and dust cap for complete replacement.
Installation Notes
- This hub is for rear axle applications on Ford Mondeo I and Mondeo II Station Wagon (BNP) models from 1993 through 2000 without ABS. Confirm your vehicle has no ABS before ordering.
- Confirm the 136.00 mm outer diameter matches your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Torque the axle nut to the vehicle manufacturer specification after installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
