Wheel Hub VKBA1481
The DUHUI Bearing VKBA1481 wheel hub is a rear axle hub assembly engineered for Ford Mondeo I and Mondeo II Hatchback (GBP, BAP) models from 1993 through 2000 without ABS. This rear wheel hub bearing matches OE references 5027621, 93BB2C299AB, and 93BB2C299AC and cross-references to SKF VKBA 1481, FAG 713678340, and SNR R152.43. It features a 4-hole rim pattern and no ABS sensor ring for direct replacement on the Mondeo Hatchback rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0021 |
| Part Number | VKBA1481 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Rim Hole Number | 4 |
| ABS Sensor | No |
| Kit Contents | Hub x 1, Bearing x 1, Axle Nut x 1, Dust Cap x 1 |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0021
OE Numbers: 5027621, 93BB2C299AB, 93BB2C299AC
Reference Numbers (Interchange):
FAG: 713678340
SNR: R152.43
RUVILLE: 5243
SPIDAN: 26899
OPTIMAL: 302186
DELPHI: BK684
QUINTON HAZELL: QWB860, QWB1183
MOOG: FD-WB-11352
TIMKEN: 512017
BCA: 512017
GMB: GH20402
GSP: 9230005
A.B.S.: 200010
FIRST LINE: FBK799
Automotive Bearings: BRT1225
Vehicle Fitment
FORD: Mondeo I Hatchback (GBP) (1993-1996), Mondeo II Hatchback (BAP) (1996-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit for Ford Mondeo I and Mondeo II Hatchback (GBP, BAP) models without ABS.
- Matches OE numbers 5027621, 93BB2C299AB, and 93BB2C299AC and cross-references to SKF VKBA 1481, FAG 713678340, SNR R152.43, and TIMKEN 512017 for simplified sourcing and verification.
- 4-hole rim pattern matches the original mounting configuration on the Mondeo Hatchback rear hub.
- Complete kit includes hub, bearing, axle nut, and dust cap for a full rear hub rebuild.
- No ABS sensor ring. This hub is for vehicles without ABS.
- Pre-set, pre-lubricated, and sealed design for maintenance-free operation.
Installation Notes
- This hub is for rear axle applications on Ford Mondeo I and Mondeo II Hatchback (GBP, BAP) models from 1993 through 2000 without ABS. Confirm your vehicle has no ABS before ordering.
- Confirm the 4-hole rim pattern matches your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Torque the axle nut to the vehicle manufacturer specification after installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
